User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            Omega 2170A:Type "T" Thermocouple Thermometer
DATE:                  01-Aug-97
AUTHOR:                User Contributed
REVISION:              0
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       8
NUMBER OF LINES:       77
STANDARD:              Omega TRC III
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-                        P                            F        W
  1.002  ASK+                                          X
  1.003  HEAD         * ADDITIONAL REQUIRED EQUIPMENT *
  1.004  DISP         Omega TRC III Ice Point Cell
  1.004  DISP         Omega Type "T" Reference Thermocouple
  1.005  HEAD         INITIAL CONDITIONS
  1.006  DISP         Insert the reference thermocouple into the center
  1.006  DISP         well of the Ice Point Cell.
  1.007  DISP         Connect the copper end (white connector) to the
  1.007  DISP         5700 OUTPUT HI/LO. Red wire is HI, green wire is LO.
  1.007  DISP         Connect a "T" type connector with "T" type T/C wire
  1.007  DISP         to UUT Channel 1 input.
  1.007  DISP
  1.007  DISP         Connect the "T" type connector to the output of the
  1.007  DISP         reference thermocouple.
  1.008  DISP         Select Channel 1 on the MDP-8 SCANNER.
  1.009  HEAD         {}
  1.010  HEAD         {* ThermoCouple Tests *}
  1.011  STD          Omega TRC III
  1.012  MEM2         = 1
  1.013  CALL         Omega 2170A Sub 1
  1.014  JMP          2.001
  1.015  EVAL
  2.001  MEM2         = 2
  2.002  CALL         Omega 2170A Sub 2
  2.003  CALL         Omega 2170A Sub 1
  2.004  JMP          3.001
  2.005  EVAL
  3.001  MEM2         = 3
  3.002  CALL         Omega 2170A Sub 2
  3.003  CALL         Omega 2170A Sub 1
  3.004  JMP          4.001
  3.005  EVAL
  4.001  MEM2         = 4
  4.002  CALL         Omega 2170A Sub 2
  4.003  CALL         Omega 2170A Sub 1
  4.004  OPBR         Is the UUT DTB# 12-187?
  4.005  JMPT         8.005
  4.006  JMP          5.001
  4.007  EVAL
  5.001  MEM2         = 5
  5.002  CALL         Omega 2170A Sub 2
  5.003  CALL         Omega 2170A Sub 1
  5.004  JMP          6.001
  5.005  EVAL
  6.001  MEM2         = 6
  6.002  CALL         Omega 2170A Sub 2
  6.003  CALL         Omega 2170A Sub 1
  6.004  JMP          7.001
  6.005  EVAL
  7.001  MEM2         = 7
  7.002  CALL         Omega 2170A Sub 2
  7.003  CALL         Omega 2170A Sub 1
  7.004  JMP          8.001
  7.005  EVAL
  8.001  MEM2         = 8
  8.002  CALL         Omega 2170A Sub 2
  8.003  CALL         Omega 2170A Sub 1
  8.004  HEAD         {}
  8.005  END
#! T.U.R.s less than 4.00:                  0
#! T.U.R.s estimated using RANGE value:     0
#! T.U.R.s not calculated (ASK- U):         0
#! T.U.R.s not computable at compile time:  0
#! FOR JUSTIFICATION REFER TO COMMENTS FOLLOWING EACH TEST IN THIS LISTING.